Usage Environment
An appropriate location for installing the printer should be selected after referring to the following conditions for the installation site and installation space.
CAUTION
•Always use a separate, earthed power outlet.
•Avoid places subject to sudden change of temperature or humidity, dust, or the direct rays of the sun.
•The
•Don't block the ventilation holes of the
•The floor should be level and free from vibration.
•Avoid places near a device that produces heat, such as a stove or heater.
•Avoid using the printer under strong light globes or halogen lamps.
Environmental Conditions for the Installation Site
We recommend setting up the printer in a place that conforms to the conditions in the following table.
With regard to temperature and humidity in particular, even if the conditions fall within the ranges indicated, places subject to sudden changes should be avoided.
We recommend setting up in a place that can be air conditioned in order to maintain constant temperature and humidity.
Area for Installation | At least 3 m2 with a doorway of 1.5 m | |
Floor Strength |
| At least 2490 Pa (300 kg/m2) |
Power Supply | Voltage | 100 V to 120 V AC 10% or |
|
| 200 V to 240 V AC 10% |
| Frequency | 50/60 Hz 1% |
| Capacity | Use a power outlet rated for at least 10 A |
Temperature |
| 10˚C to 35˚C (16˚C to 25˚C for assured |
|
| printing accuracy) |
|
| Variation rate: Not more than 2˚C per hour) |
Humidity |
| 35% to 80% (50% to 60% for assured |
|
| printing accuracy) with no condensation |
|
| Variation rate: Not more than 5˚C per hour) |
|
|
|
14 |