To Receive Data from the Computer

Command Set-up (User Settings)

NOTE

•If values other than those set at the time of shipping from Mutoh are used, be sure to refer to "Centronics Settings" or "Network Settings" in the separate Functions Edition of the User Guide.

Command Set-up (User Settings)

Each user will specify the online commands from the computer and the command conditions.

Commands

The type of command for verification is the MH-GL system (MH-GL/GL2, MH- GL2, RTL-PASS).

MH-GL system commands (emulation of Hewlett-Packard printer com- mands)

Settings at the time of shipping by Mutoh

Command

Item

Initial position

P1

Terminator

Normal

Resolution

360 dpi

NOTE

•If values other than those set at the time of shipping from Mutoh are used, be sure to refer to "Command Settings" in the separate Functions Edition of the User Guide.

50

RJ-6000 Series USER GUIDE Basic Edition