When Trouble Strikes
#It prints but the position is not right (there are places that cannot be printed)
| Possible Cause | Remedy | Reference |
| Page | ||
|
|
| |
(1) | Is the media loaded in the | Load media correctly. | Page 37 |
| right position? |
|
|
(2) | Have you made scale or | Cancel scale and mirror set- | Page 45 of |
| mirror settings? | tings or repeat the | Functions |
(3) | Is an initial position speci- | Cancel initial position setting | Page 35 of |
| fied? | or repeat the | Functions |
(4) | Is the printing abnormal | Leave for 24 hours after ink | Page 32 |
| after ink was filled? | filling and try printing again |
|
#Media jams occur frequently
NOTE
•If the media is not media specified by Mutoh, proper media feeding can not be guaranteed.
Reference
Possible CauseRemedy
Page
(1)Are you using media spec- Use media specified by Mutoh. Page 37 ified by Mutoh?
(2) | Is your usage environ- | Use in the specified environ- | Page 14 |
| ment other than that spec- ment. |
| |
| ified? |
|
|
(3) Are you using old media? | Replace with new media. | Page 34 | |
(4) | Is the media creased or | Replace with new media. | Page 34 |
| wrinkled? |
|
|
#Roll paper is not cut cleanly
Possible Cause | Remedy | Reference | |
Page | |||
|
| ||
(1) Is the cutter sharp? | Replace cutter. | Page 82 |
(2)Is the media charged with Remove static charge. static electricity?
(3) Are you using cloth? | Cut cloth manually. | Page 57 |
Strikes Trouble When
93 |