Loading the Media Loading Cut Media
Loading Cut Media
Step 1
Open the cover, check that head is in a position where it will not touch the media keeper blade and put the hold lever up.
Step 2 Selecting media
Press the [MEDIA] key on the Control panel to light the Sheet media LED.
Step 3 Loading media
Insert seasoned media between the pressure roller and the drive roller.
Step 4
Align the right edge of the media with the middle of the guide line (holes).
IMPORTANT
Hold Lever
: Lit
: Not lit
•The guide line (holes) is a guide
There is a possibility of a media jam if the pressure roller is not holding the left edge of the media and the pressure roller is near the right edge. Either hold the left edge of the media com- pletely with the pressure roller or slide it so that pressure roller is about 5 mm away from the right edge of the media and the right edge of the media is within 5 mm to the left or right of the guide line (holes).
38 |