Loading the Media
Loading Roll Media
NOTE
•Roll media generally comes with externally wound specifica- tions in which the front surface of the media is on the outside, or internally wound specifications in which the front surface of the media is on the inside. Roll media specified by Mutoh is wound to external specifications in order to give effect to the printing. Please use media specified by Mutoh.
Step 6 Mounting the scroller on the printer
Attach the scroller, with roll media loaded, to the scroller receiver. Hold the fixed flange side with your left hand,insert the left side into the scroller support from the inside and press the right side from above.
Scroller Support | Fixed Side of Scroller | Scroller Support |
Step 7
Remove the tape from the roll media and unroll a length of roll media. From the rear, insert the end of the roll media between the pressure roller and the drive roller, being careful that the end of the roll media does not catch on the media keeper blade, and let it hang down at the front.
Roll Media
42 |