Head Fastening Fitting
Assembling the Printer
Step 3
Place the main unit on the stand with the front towards the locking castors on the stand.
Step 4
Fasten the main unit to the stand using hexagonal socket head bolts (short) through the holes on both sides of the stand.
| Hexagonal | |
| Socket | |
Hexagonal Socket | Head Bolt | |
(short) | ||
Head Bolt (short) | ||
|
Step 5
Peel off the white tapes holding the cover and waste liquid box.
Tape
Step 6
Undo the wing screw holding the printing table and remove the head fastening fitting. Be careful not to drop the wing screw inside the printer. Peel off the white tape holding the cutter sec- tion.
Tape
Wing Screw
26 |