Replacing Waste Liquid Absorbent Sheet(Waste Box)

Waste ink accumulates in the waste box at the back of the printer. When the waste box is full, "Full Waste Ink Tank" is displayed and printer's printing operation ceases. The waste liquid absorbent sheet/waste liquid box must be replaced.

CAUTION

The used waste liquid absorbent sheet and waste liquid box (case) should be disposed of as non-combustible material in accordance with your local civic regulations.

It would dangerous for children to lick or swallow the absorbent sheet filled with waste liquid, so dispose of it promptly or put it out of reach.

If you accidentally touch the waste liquid, wash with soap and water at once.

If it should enter your eye, wash with plenty of water and see a doctor. If it is licked, gargle with water and wash out straight away. If it is swallowed, immediately drink plenty of water and consult a doctor without delay.

NOTE

 

If this message appears you

C h e c k W a s t e I n k

should prepare as replacement

 

waste liquid absorbent sheet/

 

waste liquid box.

If you continue with this message displayed

F u l l W a s t e I n k T a n k

Printing stops when this mes-

sage appears. Therefore it will

 

not be possible to continue to

 

use the printer unless the waste

 

liquid absorbent sheet/waste

 

liquid box is replaced.

If the waste box has been pulled out by mistake, leave the "Change Tank? No" display as it is and press [ENTER].

Leave the printer switched on while you replace the waste liq- uid absorbent sheet/waste liquid box.

84

RJ-6000 Series USER GUIDE Basic Edition