Loading the Media

Loading Cut Media

Step 5

Put the hold lever down.

NOTE

•Remove the roll media and scroller from the main unit before using.

•Don't load the media slantwise. The media size may be misidentified and the printing will not be normal.

•If the roll media lamp is lit by the Control panel setting, a "Roll media end" error may appear and printing will not terminate normally or the media may be cut.

•Apart from the maximum size that may be loaded, cut media can be loaded either longitudinally or laterally.

•Media has a printing surface and non-printing surface. Printing on the non-printing surface may cause blurring or blemishes. The printing surface is usually lighter.

Printing for Preparing

Step 6

Close the cover. The head will move automatically to detect the size of the media.

Step 7 Removing the media

C o n f i r m P a p e r K i n d

P l o t O K

To remove the media, open the cover and put the hold lever up, then remove the media without touching the media keeper blade.

RJ-6000 Series USER GUIDE Basic Edition

39