Loading the Media
Loading Roll Media
CAUTION
•When inserting roll media from the rear, be careful not to be injured by the pressure unit.
Step 8 Checking the position of the roll media
Turn the scroller by hand and wind up several turns of roll media. As you wind up the media, check the relative positions of the drive roller on the right and the right hand edge of the roll media. It is normal if, with the roll media pulled tight, the portion that is being wound and the portion that was unwound are straight and the right hand edge of the media is on the guide line. If this is not so, adjust the position of the roll media in accordance with step 9.
Pressure Roller | Pressure Roller |
Guide line (holes) can | Guide line (holes) is |
be seen | hidden |
Step 9 Adjusting roll media position
If the guide line (holes) can be seen, the roll media must be moved to the right.
If the guide line (holes) are hidden, the roll media must be moved to the left.
* If the roll media must be moved to the right
Turn the scroller adjusting screw at the rear left side of the printer to the left
Scroller Adjusting
Printing for Preparing
Screw
When moving the roll media to the right
43 |