When printing A0 size or larger widths, very small amounts of ink will be ejected on the left edge for stable printing quality. The waste ink ejected on the left side in that way is collected in a translucent bottle under the main unit (the waste ink bottle).
Waste Ink Bottle
Step 1
Since there is no panel display or lamp display when the waste liquid absorbent sheet in the waste ink bottle is to be replaced, you should prepare to replace the waste liquid absorbent sheet when you see that the bottle is about half full. Have a new absorbent sheet, a thick vinyl bag and a pair of forceps ready.
NOTE
•Conditions vary for the waste ink bottle to become half full but it will be after printing about 2000 A0 pages.
Step 2
Remove the waste ink bottle by turning it to the left. Using absorbent sheet and forceps, soak up the waste liquid in the bottle and discard the waste liquid absorbent sheet into the open vinyl bag.
Step 3
The waste ink bottle, fitted with new waste liquid absorbent sheet, is installed in the printer by turning it to the right.
Maintenance Daily
87 |