Australia
INSTALLATION
Check the appliance is electrically safe and gas sound when you have finished.
This shows the
Fixed Wiring
For connection to fixed wiring, i.e. flexible conduit, remove the electrical terminal cover box on the back panel. Remove two screws and blanking plate from the bottom flange of the cover box, so as to allow the conduit through.
Each burner has an FSD (Flame Security Device) that will stop the flow of gas if the flame goes out.
For each burner, press the ignition switch on the fascia panel and push in and turn the knob to the solid flame symbol ( 
).
Keep holding the knob pressed in to let the gas through to the burner for few seconds. If, when you let go of the control knob, the burner goes out, then you have not bypassed the safety device for initial ignition. Turn the control to the off position and wait one minute, then try again, this time holding in the control knob for slightly longer.
Grill
Open the grill compartment door. Turn on the grill control and check that the grill heats up.
Oven Check
Set the clock to the time of day. See 'The Clock' section in the Users section of these instructions.
Turn on the ovens and check that the oven fans start to turn. Turn off the ovens.
Fitting the Plinth
Loosen the three screws along the front bottom edge of the cooker. Hook the central keyhole over the central screw. Twist and fit each end keyhole over their respective screws. Tighten the fixing screws.
Customer Care
Please complete your details in this Guide, make sure that the user knows how to operate the cooker, and hand over the Instructions.
Thank you.
Fix the
Replace the electric terminal cover box, making sure that the conduit is clear of the bottom flange.
Main Oven Light
Press the light switch in the main oven and check that the light is working.
NB. The oven light bulb is not included in the guarantee.
Hotplate
Check each burner in turn.
29
