8
Installation instructions
Two installation options:
Option ‘A’ - oven only (overall height 457 mm) Option ‘B’ - oven + lower trim kit accessory
(overall height 478 mm)
Note: If you are installing an appliance directly over another, you have the option of using the supplied black metal shelf cover to conceal the shelf front that would be visible between the two appliances. This needs to be fitted before
50 |
| 50 |
| 20 | |
|
| ||||
10 |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
the lower trim kit and/or appliance is installed. Refer to the instructions packed with the shelf cover accessory kit.
450 |
|
| 550 |
|
|
|
| ||
(option 'A') | 550 min. | min. | ||
470 |
| |||
|
| |||
|
|
|
| |
(option 'B') |
|
|
|
|
|
|
| 560 |
|
| 550 | 550 |
450 |
|
|
(option 'A') |
| 597 |
470 |
| |
|
| |
(option 'B') |
|
|
560 | 445 |
|
Lower trim
(optional accessory, purchased separately)
23
457 (option 'A') 478 (option 'B')
Choice of location
Important!
If you choose installation option B, you will need to install the lower trim kit BEFORE you install the appliance. Refer to the instructions packed with the lower trim kit.
The above diagrams determine the dimensions of a cabinet that will be able to hold your oven. The oven can be installed under a work top or in a column of cabinetry (open* or closed) having the appropriate dimensions for
Recessed fitting
Centre the oven in the unit to guarantee a minimum distance of 20mm with the adjacent unit. The recessed unit must be made of heat resistant material (or coated with this type of material).
■For increased stability, fasten the oven to the unit with 2 screws through the holes provided for this purpose on the lateral uprights.
1)Make a Ø 2 mm hole in the wall of the unit to avoid the wood splitting.
2)Fasten the oven with the 2 screws.
Important!
To ensure that your installation is compliant, do not hesitate to contact a household appliance specialist.
We accept no liability in the event of an accident or incident resulting from grounding that is
