Resetting a | Hardware installation |
Resetting a FortiGate-5001A board
You must eject the
Installing and removing AMC modules
!
!
This section describes installing a FortiGate AMC Double width Module (ADM) in the
Caution: Do not operate the
Caution: Because the
Table 6: FortiGate AMC module LEDs
LED | State | Description |
|
|
|
HS | Off | Normal operation. |
|
|
|
| Blue | Ejection latch open. |
|
|
|
| Flashing | The module is starting up or shutting down. |
|
|
|
OOS | Off | LED currently not in use. |
|
|
|
PWR | Amber | The module is properly inserted in the FortiGate unit. |
|
|
|
| Off | The module is not receiving power from the FortiGate unit. |
|
|
|
OT | Off | LED currently not in use. |
|
|
|
LINK | Green | The correct cable is in use and the connected equipment has |
|
| power. |
| Off | No link established. |
|
|
|
ACT | Flashing | Network activity at this interface. |
| Green or |
|
| Amber |
|
| Off | No network activity at this interface. |
|
|
|
ACT/RDY | Amber | The module is properly inserted in the FortiGate unit. |
|
|
|
| Off | The module is not receiving power from the FortiGate unit. |
|
|
|
PORT | Off | LED currently not in use. |
|
|
|
This section describes:
•Inserting AMC slot filler panels
•Inserting AMC modules
•Removing AMC modules
| |
20 |