|
|
Quick Configuration Guide | Configuring NAT/Route mode |
Table 8:
Admin Administrator Password:
port1 | IP: | _____._____._____._____ | |
Netmask: | _____._____._____._____ | ||
| |||
port2 | IP: | _____._____._____._____ | |
Netmask: | _____._____._____._____ | ||
| |||
| Device (Name of the Interface |
| |
| connected to the external |
| |
| network): |
| |
| Default Gateway IP address: |
| |
Default Route | _____._____._____._____ | ||
| The default route consists of the | name of the interface connected | |
| to an external network (usually the Internet) and the default | ||
| gateway IP address. The default route directs all | ||
| this interface and to the external network. | ||
|
|
| |
DNS Servers | Primary DNS Server: | _____._____._____._____ | |
Secondary DNS Server: | _____._____._____._____ | ||
|
Using the web-based manager to configure NAT/Route mode
1Connect port1 of the
Note: If you cannot connect to port1, see “Using the CLI to configure NAT/Route mode” on page 30.
2Configure the management computer to be on the same subnet as the port1 interface of the
3To access the FortiGate
4Type admin in the Name field and select Login.
To change the admin administrator password
1Go to System > Admin > Administrators.
2Select Change Password for the admin administrator and enter a new password.
Note: See the Fortinet Knowledge Center article Recovering lost administrator account passwords if you forget or lose an administrator account password and cannot log into your FortiGate unit.
To configure interfaces
1Go to System > Network > Interface.
2Select the edit icon for each interface to configure.
| |
29 |