Installing and removing AMC modules | Hardware installation |
To complete this procedure, you need:
•A
•FortiGate AMC module to install
•An electrostatic discharge (ESD) preventive wrist strap with connection cord
Caution:
1 Attach the ESD wrist strap to your wrist and to an available ESD socket or wrist strap terminal.
2 Eject the
3 With the
4 Pull the latch on the FortiGate AMC module front panel to the extended position.
5 With the
6 Carefully guide the module into the
7 Insert the module by applying moderate force to the front faceplate near the upper edge to slide the module into the opening.
The module should glide smoothly into the opening. If you encounter any resistance while sliding the module in, the module could be aligned incorrectly. Pull the module back out and try inserting it again.
8 Press the latch on the module front panel to lock in the module.
9 Insert the
Removing AMC modules
!
!
Before removing an AMC module you need to shut down the
To remove an AMC module from a FortiGate-5001A board
Caution: Do not operate the
Caution: Because the
To complete this procedure, you need:
•A
•An electrostatic discharge (ESD) preventive wrist strap with connection cord
| |
22 |
