|
|
Hardware installation | Changing |
To change or verify the SW11 switch setting
To complete this procedure, you need:
•A
•A tool for changing the SW11 switch setting (optional)
•An electrostatic discharge (ESD) preventive wrist strap with connection cord
Caution:
Always wear a grounded electrostatic discharge (ESD) preventive wrist strap when handling
1 Attach the ESD wrist strap to your wrist and to an available ESD socket or wrist strap terminal.
2 If you have installed the
For removal instructions, see “Removing a
3 Use Figure 8 to locate SW11 on the
The top of the
Figure 8: Location of SW11 on the
Location of SW 11
Factory Default (Shelf Manager Required)
| ON |
| 1 | Off | |||
SW11 |
|
|
|
|
| 2 | On |
|
|
|
|
| 3 | Off | |
|
|
|
|
|
| 4 | Off |
| 1 | 2 | 3 | 4 |
|
|
|
Standalone Mode for
| ON |
| 1 | Off | |||
SW11 |
|
|
|
|
| 2 | On |
|
|
|
|
| 3 | On | |
|
|
|
|
| 4 | Off | |
|
|
|
|
|
| ||
| 1 | 2 | 3 | 4 |
|
|
|
FortiGate-5001A board(top view)
4If required, change SW11 to the correct setting.
5Insert the
For inserting instructions, see “Inserting a
Note: Figure 8 shows a
| |
13 |