Fostex MR16 owner manual Moving the parts, 134

MR16 Owner’s Manual (Part editing)

Moving the part(s)

You can move the desired part(s) of the desired track(s) to the other desired track(s).

The part move operation can be made only within the current song. After the part move opera- tion is carried out, the source part(s) becomes silent.

ABS ZERO Locate A point Locate B point REC END

You can move the desired part(s) on the desired track(s) to the other desired track(s).

<Note>: You cannot move data of a song protected. Release the protection before moving data.

1)Load the song you want to edit.

2)Set the LOCATE A and LOCATE B points (see page 53).

You can check the part(s) by playing back between the LOCATE A and LOCATE B points (see page 48).

5)Rotate the [MENU/ENTER] knob to select

"Move Part ", and press the [MENU/ENTER] knob.

The display now shows the screen for selecting the source track(s) and destination track(s) of the move operation.

3)While the recorder is stopped, press the [MENU/ENTER] knob to enter the menu mode.

The display now shows the first page of the menu selection screen.

4)Rotate the [MENU/ENTER] knob to select

"Part Edit ", and press the [MENU/ENTER] knob.

The display now shows the part edit menu screen.

6)Rotate the [MENU/ENTER] knob to select "Source Track = *", and press the [MENU/ENTER] knob.

You can now select the move source track(s) by rotating the [MENU/ENTER] knob.

The available options are:

•1 through 8 (mono track)

•1/2, 3/4, 5/6, 7/8, 9/10, 11/12, 13/14 and 15/16 (stereo tracks)

Flashing

134