Fostex MR16 Cueing, Playback between Locate a and B points, Key while holding down the Stop key

MR16 Owner’s Manual (Advanced playback and locate functions)

3 x cueing

By holding down the [F FWD] or [REWIND] key during playback, the recorder enters cueing mode and you can monitor playback at 3 x speed. It may be useful for searching a specific position.

BOUNCE MODE	15/16 > STEREO WAV FILE
		MENU / ENTER
	BOUNCE
NATURAL	BRIGHT	TIMEBASE SELECT STORE	UNDO/REDO

MASTERING

•By holding down the [F FWD] key during play back, the recorder starts cueing forwards at 3 x speed.

During forward cueing, "" is shown on the display.

REWIND	A / IN	B / OUT	RHYTHM GUIDE	CONTRAST	DIRECT LOCATE
			LOCATE		F FWD

DELETE

REC SELECT REWIND F FWD

15/16 MASTER

MAX

		LOCATE ABS ZERO	LOCATE REC END	•	By holding down the [REWIND] key during play
		RECORD STOP	PLAY
[REWIND] key			[F FWD] key
					back, the recorder starts cueing backwards at 3
			A-B PLAY
	MIN
					x speed.
					During backward cueing, " " is shown on the
					display.

Playback between LOCATE A and B points

When the LOCATE A and LOCATE B points are set, you can playback between these points once. This function is always available regardless of the play mode setting (see "Play mode" on next page). This function allows you to check the editing part (between LOCATE A and B points) for copy/paste, erase, etc. See "Part editing" described later.

BOUNCE MODE	15/16 > STEREO WAV FILE				•	While the recorder is stopped, press the [PLAY]
	BOUNCE	MENU / ENTER
NATURAL	BRIGHT	TIMEBASE SELECT	STORE	UNDO/REDO		key while holding down the [STOP] key.
	MASTERING					The MR16 plays back audio data between the
A / IN	LOCATE	RHYTHM GUIDE	CONTRAST	DIRECT LOCATE		LOCATE A and LOCATE B points once, then
	B / OUT
DELETE						stops.
STOP	REC SELECT	REWIND		F FWD	PLAY
15/16	MASTER

MAX

LOCATE ABS ZERO LOCATE REC END

RECORD STOPPLAY

LOCATE A point LOCATE B point

	MIN	A-B PLAY
[STOP] key		[PLAY] key

Playback

<Note>: Note that this function is available only when the LOCATE A and B points are set.

See page 53 for details about how to set the LO- CATE A and B points.

<Note>: If you carry out the operation above when the LOCATE A point is set ahead of the LOCATE B point (i.e. LOCATE A > LOCATE B), the MR16 plays back audio data from the LOCATE A point to the REC END points once, then stops.

While the recorder is playing back between the LOCATE A and B points, the display shows the icon as below.

During playback, you can monitor playback audio of the desired track(s) by raising the ap- propriate track fader(s), the [MASTER] fader and the [PHONES] control.

48