Fostex MR16 owner manual While the recorder is stopped, press the 1-8 NEW Song key

MR16 Owner’s Manual (Track bouncing)

1)While the recorder is stopped, press the [1-8 > NEW SONG] key.

The [1-16 > NEW SONG] key lights up and the display shows the screen below. If you execute track bouncing, press the [MENU/ENTER] knob while holding down the [RECORD] key.

<Note>: When you are going to execute track bounc- ing, if there is not enough space on the hard disk or 99 songs already exist on the disk, a warning message appears and the operation is canceled.

If you cancel track bouncing, press the [STOP] key.

2)Press the [MENU/ENTER] knob while holding down the [RECORD] key.

Track bouncing starts. The mixed (bounced) sig- nals are recorded to tracks 15/16 of a new song. The screen example below shows that tracks 1 through 16 of Song01 (whose name is “Moon- lit”) is now being bounced to tracks 15/16 of the new song (Song04).

Meters 1 through 16 show the playback levels of tracks 1 through 16, while the L and R meters shows the recording levels of tracks 15/16 of Song04.

When track bouncing to a new song completes, the recorder automatically stops and the dis- play shows the home screen of the new song. The song name of the new song is given by the name of the original song with “-**” (** is a two-digit number).

You can check the result by following the pro- cedure described in “Checking the bounced signals on tracks 15/16” on page 81.

<Note>: To cancel track bouncing in the middle, press the [STOP] key. Pressing the [STOP] key automatically deletes the new song created in step 2 above and turns off the bounce mode.

<Track bouncing while mixing signals from [INPUT A] through [INPUT D]>

When you bounce tracks 1 through 16 to tracks 15/16 of the new song, you can also mix signals from [INPUT A] through [INPUT D] together (see next page).

84