19
Windows
18
Windows
Card Reader (DSC) Connection – Viewing Images and Downloading Audio Files –
1. Load the SmartMedia.
To download music, you must use a SmartMedia with ID.
2. Remove the connection socket cover on the side of the
camera.
✽When you remove the camera from the cradle to take pictures, replace the
connection socket cover on the camera to prevent dust buildup on the socket.
Take care not to lose the connection socket cover while the camera is in the
cradle.
3. Place the camera in the cradle and slide it onto the
connection terminal.
✽Push the cradle connection terminal firmly into the camera socket.
4. With the lens cover closed, slide the power switch to “”
to switch the camera on.
NOTE
Removing the Camera from the Cradle (Card Reader Connection)
1. Exit FinePixViewer.
2. Check that the CHARGE/ACCESS lamp (red) on the cradle is
not flashing.
3. Perform this step before you switch off the camera. The
procedure for this step varies depending on the operating
system used.
No action is required on your PC.
Click the “Unplug or Eject Hardware” icon in
the taskbar and eject “USB Disk”.
Click the “Unplug or Eject Hardware” icon in
the taskbar and eject “USB Mass Storage”.
Drag the “Removable drive” icon on the desktop to the Trash.
☞Check that the CHARGE/ACCESS lamp (red) on the cradle is flashing slowly.
4. Switch the camera off.
Check that the POWER lamp (green) is off.
5. Remove the camera from the cradle.
6. To prevent dust buildup on the socket, replace the
connection socket cover.
NOTE
Macintosh
Windows 2000 Professional
Windows Me
Windows 98
●
2
●
1
If you are using Windows, Mass Storage Driver installation
(/P.22) begins the first time you connect the camera to your PC.
red