30 31
Windows
Windows
9. Check that VC4CB104.INF
has been detected and then
click the [Next >] button.
The Windows 98 CD-ROM may also be
required during installation. In this event,
switch CD-ROMs as directed by the on-
screen instructions.
10. Click the [Finish] button.
11. FinePixViewer starts up and the “PictureHello” window
automatically opens. Check that the live video image is
displayed in the “PictureHello” window.
✽If live images are not displayed, installation was not completed successfully.
Refer to “Troubleshooting” (P.78).
12. Remove the camera from the cradle. (/P.21)
1Exit FinePixViewer.
2Check that the CHARGE/ACCESS lamp on the cradle is not flashing.
3Switch the camera off.
☞When a battery is loaded, the CHARGE/ACCESS lamp lights and charging
begins. If no battery is loaded or if charging has already ended, the
CHARGE/ACCESS lamp does not light.
4Slide the camera off the cradle connector and lift the camera out of the cradle.
5To prevent dust buildup on the connector, replace the connection socket cover
on the camera.
NOTE
6. The “Add New Hardware Wizard” dialog appears. Click the
[Next >] button.
If the dialog box does not appear, uninstall
(See P.63) and then re-install the PC
Camera Driver. (See P.29.)
7. Select “Search for the best driver for your device
(Recommended)” and click the [Next >] button.
8. Tick the “CD-ROM drive” checkbox and then click the [Next >]
button.
✽If any checkboxes other than “CD-
ROM drive” are ticked, clear the
ticks so that “CD-ROM drive” is the
only checkbox ticked.
✽The dialog shown may differ slightly on some types of PC.
NOTE
Windows 98/98SE
You can now view the images you shot on your FinePix50i on the PC
screen (/P.36).
See P.56 for information on how to listen to your audio files.