93
Macintosh
Once user registration is completed, you can use the FinePix Internet
services.
Selecting services
1. Click the menu button for the service you want to use.
If you are not already connected to the Internet, the software automatically
attempts to connect (for dial-up connections).
Operation after you click the menu button differs depending on the button you
click. For instance, you may jump to your service provider’s web site or an
upload dialog box may open.
The actual Internet menu may differ slightly in appearance from the sample
shown here.
Move the mouse cursor over an Internet menu button to view information about the
service.
2. When you have finished using the Internet services,
disconnect from the Internet (for dial-up connections).
The connection speed will vary significantly depending on the quality of your phone line
and the amount of traffic on the server to which you are connected.
Updating the Menu
1. Select Menu Update from the View menu.
2. The Enter Network Password dialog box appears.
Enter the user ID and password set during user registration
and then click the [OK] button to update the Internet menu.
If you are not already connected to the Internet, the software automatically
attempts to connect (for dial-up connections).
As well as the Internet menu being updated, related information pages may also be
opened. Because these pages may contain good news or useful information, you
should update the Internet menu frequently.
TIP
NOTE
TIP
Using the Services
92
Macintosh
5. When the browser starts up, proceed as directed by the
on-screen instructions.
6. Enter the required information in the user registration page.
1Enter the name of your choice (nickname, etc.).
2Enter a password of your choice using letters and/or numbers. Then enter the
password again for confirmation.
3Enter your name.
4Enter your e-mail address.
5Enter the remaining required information.
After you register, a confirmation e-mail message is sent to you. Be sure to enter
a valid e-mail address at which you can receive the message.
The actual user registration page may differ slightly in appearance from the
sample shown here.
7. When you have entered all the required information, click the
[Register] button at the bottom of the page.
Once you complete the registration, a confirmation e-mail is sent.
Wait a few moments until the message is sent.
1
2
3
4