13
Windows
12
Windows
Installing the Software1. Switch on your PC and start up Windows.
✽If you had already switched on your PC, restart your PC at this point.
2. Quit all other active applications until no applications are
shown in the taskbar.
1Click the right mouse button on the application icon in the taskbar.
2Click “Close” in the menu that appears to quit the application.
✽Refer to the instructions provided with your PC and applications (antivirus
software, etc.) for details.
3. If the applications listed below are already installed on your
PC, use the procedure on P.64 to uninstall them.
●Exif Viewer
●Exif Launcher
●DP Editor
4. Load the enclosed CD-ROM into the CD-ROM drive. The
installer starts up automatically.
Installation Preparations
<Taskbar>
Applications to be shut down
(the icons shown vary depending on
the applications that are running)
Launching the Installer Manually
1. Double-click the “My Computer” icon.
2. Right-click “FINEPIX” (CD-ROM drive) in the “My
Computer” window and select “Open”.
3. Double-click “SETUP” or “SETUP.exe” in the CD-ROM
window.
✽The way file names are displayed differs as described below depending on your
computer settings.
• File extensions (3-letter suffixes indicating the file type) may be shown or
hidden. (e.g. Setup.exe or Setup)
• Text may be shown normally or all in uppercase (e.g. Setup or SETUP).
1. The Setup screen appears.
Click the [Install
FinePixViewer] button.
2. A list of the applications to
be installed appears. Check
the list and then click the
[OK] button.
3. Install FinePixViewer, DP
Editor and Exif Launcher.
1Notes/warnings concerning the
applications to be installed are
displayed. Check the
notes/warnings and then click the
[Next >] button.
2Check the installation destination
folder and then click the [Next >]
button.
3A confirmation window appears
when installation is completed. Click
the [OK] button and then install DP
Editor and Exif Launcher. (Repeat
the procedure from step 1.)