39
Windows
38
Windows
1. Click the “Automatic Save” button.
☞A folder with the date the shots were taken (“2001_0702” etc.) is created in the
FinePixViewer installation folder and the images are saved in the new folder.
Saving Camera Images on Your PC and Checking the Details
2. When you click a folder containing saved images in the folder
tree area (e.g. C:/Program files/FinePixViewer/2001_0702), the
images in the folder are displayed as thumbnails.
3. Double-clicking on a thumbnail opens the image in its own
image window.
1. Select the images to be deleted.
You can select multiple images by holding down the Shift key or Ctrl key as you click
the images.
2. Press the “Delete” key on the keyboard.
3. Click the [OK] button in the confirmation window to delete the
selected images.
TIP
Deleting Images
Character Synthesis:
Allows you to type in text on the screen.
Cropping
Image size:
Allows you to
change the image
size.
Rectangle selection
tool:
Allows you to specify
an area to be cropped
on the screen.
Rotate left (CCW)
Rotate right (CW)
Hand tool:
Use this to scroll
the screen display.
Zoom Out:
Use this to shrink
the screen display.
Zoom In:
Use this to enlarge
the screen display.
1. Select “Exit” in the “File” menu or click the [Close] button in
the Main window to exit FinePixViewer.
2. Check that the CHARGE/ACCESS lamp (red) on the cradle is
not flashing.
☞Data access between the camera and PC is finished.
In Windows 2000 Professional or Windows Me, click the [ ]
icon in the taskbar and eject “USB Mass Storage” or “USB
disk”.
In Windows 2000 Professional or Windows Me, your PC may malfunction if you remove
the camera from the cradle or disconnect the USB cable without first using the “Eject
hardware” procedure.
3. Switch the camera off, check that the POWER lamp (green) is
off, and then take the camera out of the cradle.
• You must first close all the camera (removable disk) files and check that the
CHARGE/ACCESS lamp (red) on the cradle is not flashing.
• When the “Copying” message disappears from your PC screen, wait a few moments
before removing the camera from the cradle or disconnecting the USB cable. If you
are copying a large amount of data, camera access continues for a short time after
the message displayed on the PC has disappeared.
NOTE
NOTE
Removing the Camera from the Cradle (/P.19)
red
You can use “Automatic Save Setting” in the “Settings” menu to change or set the save
destination and file names. For details, refer to “English.pdf” in the “FinePixViewer”
folder in “Programs” in the “Start” menu.
TIP
Automatic Save button