If you are not running Exif Launcher
Select “Programs” /“FinePixViewer” /“FinePixViewer” in
the “Start” menu. FinePixViewer then starts up.
5. The camera is connected as a removable disk drive. The
images on the SmartMedia are contained in the “DCIM” folder
on the removable disk.
<As shown in the My Computer window> <As shown in FinePixViewer>
✽The window actually shown on your PC may differ from that shown in the figure.
If you are not running Exif Launcher, click the “100_FUJI” folder to display the images.
NOTE
36 37
Windows
Windows
• When you install Exif Launcher, it is registered in the startup menu and is
launched automatically when Windows starts up.
• If the icon in the figure is shown in the
taskbar, Exif Launcher is running.
• To quit Exif Launcher, click the right mouse button on the [ ] icon in the
taskbar and select “Exit” from the menu that appears.
☞When you quit Exif Launcher, the icon will disappear from the taskbar.
Thumbnail display area
<FinePixViewer startup window>
Thumbnail images for the image data
recorded on the SmartMedia are
displayed in the thumbnail display area.
This thumbnail indicates
an audio file.
Folder tree display area
Thumbnail
Exif Launcher
For detailed information on using the FinePixViewer and DP Editor, refer to
“English.pdf” in “FinePixViewer” in “Programs” in the “Start” menu.
• Always use the correct procedure when removing the camera from the cradle or
switching the camera off.
• Do not perform any of the following when the camera is connected to a PC as this
could damage the SmartMedia or corrupt the data on the SmartMedia:
Remove the camera from the cradle / Disconnect the USB cable or AC cable / Touch
the camera controls (power switch, control buttons or lens cover) / Connect the AV
cable
• Do not format the SmartMedia from your camera on a PC as this may make the card
unusable for taking pictures.
• Use only SmartMedia containing shots taken on a FUJIFILM digital camera.
1. Start up your PC.
2. Load a SmartMedia containing photographed images.
3. Place the camera in the cradle and switch the camera on with
the lens cover closed. (/P.18)
4. Launch FinePixViewer.
If you are running Exif Launcher
When you switch the camera on, Exif Launcher starts up
FinePixViewer, which then displays the images on the
camera.
If FinePixViewer is slow to start up, refer to “Troubleshooting” (/P.71).
NOTE
NOTE
TIP