55
Windows
54
Windows
6. Display switches to the capture window and the live image is
displayed. If the live image does not appear, click the Live
button 1.
✽Recording has not yet started.
7. Use the Drives button 2to select “USB PC Camera”.
8. Click the Record button 3to start recording.
9. Click the Record button 3again to end recording.
✽The recorded images are not saved to a file.
■To check the images
Click the Play button 4.
■To save the images to a file and return to the Album window
1. When you click the [album] button, the Save dialog box
opens. Specify the save destination and click the [OK] button.
2. When the album storage confirmation dialog box appears,
click the [OK] button.
• Always use the correct procedure when removing the camera from the cradle or
switching the camera off.
• Do not perform any of the following when the camera is connected to a PC as this
may cause the PC to hang:
Remove the camera from the cradle / Disconnect the USB cable or AC cable / Touch
the camera controls (power switch, control buttons or lens cover) / Connect the AV
cable
NOTE
134
2
Capturing Live Images
1. Place the camera in the cradle and switch the camera on with
the lens cover open. (/P.20)
2. If FinePixViewer starts up, quit FinePixViewer.
3. In the “Start” menu, select “Programs” /“ArcSoft
VideoImpression” /“ArcSoft VideoImpression 1.6”.
4. When the startup screen appears,
click the [new] button.
5. When the album window opens,
click the [capture] button.
3. When you click the [save] button, the Save dialog box
appears. Specify the save location, file name, etc. and save
the movie file.
• If you leave the mouse pointer positioned over a button or image for a few seconds,
information about that button or image is displayed.
• In any window, you can access the online help by clicking “?”.
• In addition to “MPEG”, you can choose from a wide range of formats for saved files.
TIP