73
Windows
72
Windows
Possible cause Solution
■The PC hangs when I access the SmartMedia.
When opening the Device Manager,
there is a yellow “!” mark next to the
driver in “Universal Serial Bus
controllers”.
When opening the Device Manager,
there is a yellow “!” mark next to USB
Mass Storage.
Is an older version of the Mass Storage
Driver software installed?
You are using a driver or camera that
prevents the driver for the Universal Serial
Bus controllers from operating. Refer to
the User’s Manual for your PC and check
your hardware and software setup.
You are using a driver or camera that
prevents the Mass Storage Driver from
operating. Uninstall (see P.63) and then
re-install Mass Storage Driver (see P.22).
Use the CD-ROM provided to uninstall
any older versions of the Mass Storage
Driver. Then install the new Mass Storage
Driver provided on the CD-ROM.
Possible cause Solution
■The camera and PC are connected but no removable disk icon is
displayed.
Is the camera switched on?
Is the SmartMedia loaded in the
camera?
Is the camera’s lens cover closed?
Is the special USB cable connected to
the cradle and to the computer?
Are you using a compatible operating
system?
Is the Mass Storage Driver running?
If you are using Windows 2000
Professional, are you logged on as an
Administrator group?
1Connect the AC power adapter to the
cradle and place the camera in the
cradle.
2Close the lens cover.
3Slide the power switch on the camera to
the right to switch the camera on.
Load a SmartMedia into the camera.
Refer to the Owner’s Manual for your
camera for details.
1Switch the camera off using the correct
procedure.
2Close the lens cover.
3Slide the power switch on the camera to
the right to switch the camera on.
Check that one end of the special USB
cable is connected to the cradle and the
other end is connected to the computer.
The Mass Storage Driver should be used
with Windows 98/98SE, Windows Me or
Windows 2000 Professional.
Double-click “System” in the Control
Panel, select the Device Manager tab and
check the USB Mass Storage. If the driver
is marked with a yellow “!” or a red “x”,
Mass Storage Driver is not running.
Uninstall (see P.63) and then re-install
Mass Storage Driver (see P.22).
Log on as an Administrator group.
Refer to the User’s Manual for your PC for
more information on Administrators.