85
Macintosh
84
Macintosh

Connecting the Camera and Macintosh and Viewing Images

Using the Software on a Macintosh
For detailed information on using FinePixViewer and DP Editor, refer to “English.pdf” in the
folder where the software was installed. See P.84 for information on how to view “English.pdf”.
• Always use the correct procedure when removing the camera from the cradle or
switching the camera off.
• Do not perform any of the following when the camera is connected to a Macintosh as
this could damage the SmartMedia or corrupt the data on the SmartMedia:
Remove the camera from the cradle / Disconnect the USB cable or AC cable / Touch the
camera controls (power switch, control buttons or lens cover) / Connect the AV cable
• Do not format the SmartMedia from your camera on a Macintosh as this may make
the card unusable for taking pictures.
• If you use a SmartMedia that was formatted on the camera and replace a folder on
the SmartMedia with a folder with the same name on your hard disk, the files may be
corrupted. Delete the folder on the SmartMedia or rename the folder before copying
the folder.
• Use only SmartMedia containing shots taken on a FUJIFILM digital camera.
1. Start up your Macintosh.
2. Set up the cradle.
3. Load a SmartMedia containing images you have shot into the
camera.
4. Place the camera in the
cradle and switch the
camera on with the lens
cover closed. (/P.18)
5. Launch FinePixViewer.
When you switch the camera on, Exif Launcher starts up
FinePixViewer.
✽If you changed the Exif Launcher settings, FinePixViewer will not start up.
Double-click the FinePixViewer icon in the installed folder.
If you are not running Exif Launcher
If you are running Exif Launcher
NOTE
TIP

To View Images Using FinePixViewer

The User’s Guide (PDF) and How to Read It

To read the FinePixViewer User’s Guide (PDF), you must have Adobe
Systems’ Acrobat Reader installed on your computer. See P.83 for
information on installing Acrobat Reader.
■Reading the User’s Guide
1. Double-click “English.pdf” in the folder in which
FinePixViewer was installed.
☞Acrobat Reader starts up and displays the User’s Guide.
2. To jump to the relevant page, click the desired topic listed in
the Contents or Bookmarks.
✽To view the bookmarks, click “Show Bookmarks” in the Window menu.
For more information on how to use Acrobat Reader, refer to the Online Guide in
the Acrobat Reader Help menu.
■Printing the User’s Guide
1. Click “Page Setup” in the File menu and specify the required
settings (“Paper”, “Layout”, etc.).
☞If you print the manual at the original dimensions, each page fits on one sheet
of A4 paper in Portrait layout.
2. Click the [Print] button or select “Print” in the File menu.
3. Specify the range of pages to be printed and the number of
copies, etc. and then click the [OK] button.
• The available options vary depending on your printer and printer driver software.
Refer to your printer driver manual for details.
• For more information, refer to the Online Guide in the Acrobat Reader Help menu.
NOTE
Continued over page...