24 25
Windows
Windows
7. The “Add New Hardware Wizard” dialog opens. Click the
[Next >] button.
• It may take a few minutes for the dialog box shown at right to appear after USB Mass
Storage is detected.
• If the dialog box does not appear, uninstall (See P.63) and then re-install the Mass
Storage Driver. (See P.22.)
8. Select “USB Mass Storage” on the same line as
“\USBDRV\WINME\UFLT04CB.INF” on the CD-ROM and then
click the [OK] button.
The Windows Me CD-ROM may also be required during installation. In this event,
switch CD-ROMs as directed by the on-screen instructions.
Click here.
Check the file name.
✽ If the CD-ROM drive is drive D:.
9. Click the [Finish] button.
NOTE
NOTE
Windows Millennium Edition (Windows Me)10. Check that USBS04CB.INF
has been detected and then
click the [Next >] button.
The Windows 98 CD-ROM may also be
required during installation. In this event,
switch CD-ROMs as directed by the on-
screen instructions.
11. Click the [Finish] button.
12. FinePixViewer automatically starts up and displays the
images on the SmartMedia.
If FinePixViewer does not start up, check that a new removable disk icon (the
connected camera) has appeared in the “My Computer” window.
13. Remove the camera from the cradle. (/P.19)
1Exit FinePixViewer.
2Check that the CHARGE/ACCESS lamp on the cradle is not flashing.
3Switch the camera off.
☞When a battery is loaded, the CHARGE/ACCESS lamp lights and charging
begins. If no battery is loaded or if charging has already ended, the
CHARGE/ACCESS lamp does not light.
14. Restart your PC.
NOTE
NOTE
1First uninstall Mass Storage Driver. (See P.63.)
2Re-install Mass Storage Driver. (See P.22.)
When [ ] does not appear
Next, install PC Camera Driver. See P.29.
Continued over page...