87
Macintosh
86
Macintosh
You can quickly and easily save the shots stored on a SmartMedia onto your
Macintosh by clicking the “Automatic Save” button.
☞A folder with the date the shots were taken (“2001_0702” etc.) is created in the
FinePixViewer installation folder and the images are saved in the new folder.
You can use “Automatic Save Setting” in the “Settings” menu to change or set the save
destination and file names. For details, refer to “English.pdf” in the folder where the
software was installed.
TIP
Saving Images from the Camera on Your Macintosh
Thumbnail display area
<FinePixViewer startup window>
Thumbnail images for the image data
recorded on the SmartMedia are
displayed in the thumbnail display area.
This thumbnail indicates
an audio file.
Thumbnail
Folder tree display area
• Exif Launcher starts up automatically when you start up your Macintosh.
• To quit Exif Launcher, select “Exif Launcher Settings” in the “Settings” menu in
FinePixViewer and then select “Quit Exif Launcher immediately”.
Exif Launcher
Checking Saved Images on Your Macintosh
1. When you click a folder containing saved images in the folder
tree area (e.g. “2001_0702” in the installation folder), the
images in the folder are displayed as thumbnails.
2. Double-clicking on a thumbnail opens the image in its own
image window.
Character Synthesis:
Allows you to type in text on the screen.
Cropping
Rectangle selection
tool:
Allows you to specify
an area to be cropped
on the screen.
Rotate left (CCW)
Rotate right (CW)
Hand tool:
Use this to scroll
the screen
display.
Zoom Out:
Use this to
shrink the
screen display.
Zoom In:
Use this to
enlarge the
screen display.
Image size:
Allows you to
change the
image size.
Deleting Images
1. Select the images to be deleted.
You can select multiple images by holding down the Shift key as you click the images.
2. Click “Delete” in the “File” menu.
3. Click the [OK] button in the confirmation window to delete the
selected images.
TIP
Removing the Camera from the Cradle
1. Select “Exit” in the “File” menu or click the Close box to exit
FinePixViewer.
2. Check that the CHARGE/ACCESS lamp (red) on the cradle is
not flashing.
3. Drag the “Removable drive” icon on the desktop to the Trash
or select the “Removable drive” icon and select “Eject” from
the “Special” in the menu bar at the top of the screen.
Your Macintosh may malfunction if you remove the SmartMedia or switch the camera
off without using the correct procedure to eject the SmartMedia.
4. Once you have switched the camera off you can remove it
from the cradle.
NOTE
Automatic Save button