FujiFilm MP-300 Sending images from a camera phone, Select the image on the mobile phone

PRINTING - Infrared communication -

Sending images from a camera phone

1 Select the image on the mobile phone.

x On some models, the image cannot be sent if it is displayed at full size. If so, return to the thumbnail or

list mode and then select infrared transmission.

2 Select infrared transmission.

Rotate image

Infrared transmission

Delete image

3 Confirm the transmission (YES) to begin sending the image.

Send infrared transmission?

Y E S / N O

c Sample mobile phone screens.

x The location of the mobile phone’s infrared port, its operation procedure and the text displayed on the screens all differ depending on the particular model used. Refer to the owner’s manual for your phone.

x Refer to the owner’s manual for your mobile phone for information on how to

26send images from the mobile phone.

Examples of camera phone infrared port locations

Guide to image sizes and transmission times

The MP-300 supports IrDA high-speed communication (IrSimple/FIR). This					Printing
provides faster connection speeds and shorter transmission times when the image
is sent from a compatible device.
Main image		High-speed infrared communication (IrSimple/FIR)		Infrared
sizes (pixels)				communication
		Unidirectional	Bidirectional	(IrDA / SIR)
VGA (640×480)		Approx. 0.3 sec.	Approx. 0.3 sec.	Approx. 19 sec.
1M	(1280×960)	Approx. 1.3 sec.	Approx. 1.4 sec.	Approx. 75 sec.
3M	(2048×1536)	Approx. 1.7 sec.	Approx. 1.8 sec.	Approx. 100 sec.
5M	(2592×1944)	- (c)	Approx. 4.7 sec.	Approx. 160 sec.

cThe MP-300 cannot print ordinary images with a file size larger than 1 MB. x The times given here are purely a guide. Actual times differ depending on the

performance of the sending device (primary node).

x Transmission times vary depending on the file size and the type of sending device used.

x The transmission time will be longer if an image with a large file size is sent.

◆ Recommended image sizes for transmission ◆

For the best balance between data transmission times and image quality, images should be photographed at VGA-size (640 × 480).

xDepending on the model of the sending device, it may not be possible to shoot images at VGA-size and then send the images via infrared.

x For information on the location of the infrared port on the sending device (digital
camera, PC, PDA, etc.) and on the image transmission procedure, refer to the
owner’s manual for the sending device.	27