Troubleshooting
Problems | Possible Causes | Solutions |
|
|
|
The POWER button | 3 The sending device | 3 Send the data from a |
changed from | is not compatible with | compatible device. |
blinking to lit during | the printer. |
|
data transfer and |
|
|
nothing was printed. |
|
|
|
|
|
■Troubleshooting USB communication problems
Problems | Possible Causes | Solutions |
The print menu does | 1 The digital camera | 1 Use a PictBridge |
not appear on the | is not a PictBridge | supported digital |
digital camera. | supported model. | camera. |
| 2 PictBridge is not | 2 Change the digital |
| selected in the | camera’s USB setting |
| digital camera’s USB | to PictBridge mode. |
| setting. |
|
| 3 The USB cable is not | 3 Check the USB cable |
| connected correctly. | connections. |
| 4 The power of | 4 Power on |
| is off. |
|
|
|
|
The PictBridge lamp | The USB cable is not | Check the USB cable |
does not light. | connected correctly. | connections. |
|
|
|
The printer won’t | Data reception from the | To shorten data transfer |
start printing. (The | digital camera takes | times, use small image |
POWER button | some time because the | sizes (around 640 × 480 |
doesn’t start blinking | image is large. | pixels) for your shots. |
rapidly.) |
| (P.32) |
|
|
|
The POWER button | The device sending the | Send the data from a |
changed from | data is not compatible | compatible device. |
blinking to lit during | with the printer. |
|
data transfer and |
|
|
nothing was printed. |
|
|
46
Problems | Possible Causes | Solutions |
|
|
|
Error sign appears | 1 There was a fault of | 1 Turn the digital |
on the camera. | some kind during | camera and the |
| USB communication. | printer off and then |
|
| back on again. |
| 2 The printer is not | 2 Turn the printer on. |
| turned on. |
|
| 3 The printer is out of | 3 Load a new photo |
| film. | pack. |
|
|
|
The ERROR lamp | 1 An error occurred | 1 Resend the images. |
blinks (3 times). | during data transfer. |
|
| 2 The image sent | 2 The maximum |
| exceeds the | number of pixels |
| maximum number of | (image size) |
| pixels supported by | supported by the |
| the printer. | printer is [6400 × |
|
| 6400 pixels]. |
|
|
|
When I send multiple | The interval between | 1 Press the REPRINT |
images one at a | transmissions is 5 | button. |
time, the second and | seconds or less. | 2 When sending |
subsequent images |
| images one at a time, |
are not printed. (The |
| leave an interval of |
PictBridge lamp is |
| at least 5 seconds |
blinking.) |
| between images. |
|
|
|
47
