FujiFilm MP-300 owner manual Specification, Jpeg

Specification

Photo pack used	FUJIFILM Mobile Printer Photo Pack
	FUJIFILM instax digital film (pivi)
Image size	61 × 46 mm (2.4 × 1.8 in.)
	(Film size: 86 × 54 mm (3.4 × 2.1in.))
	Film counter (shows remaining shots)
	Power supply (POWER button)
	ERROR lamp
Display	LOW BATTERY lamp
	SHARPEN lamp
	DATE lamp
	PictBridge lamp
	POWER button (power supply)
	REPRINT button (reprints the last image)
Control buttons	SHARPEN button (SHARPEN Mode/Image
	editing)
	DATE button (DATE Mode/Date printing)
Interface	IrDA (IrSimple/FIR, SIR)
	USB (PictBridge)
Recording method	3-color (RGB) LED exposure with liquidcrystal
	shutter
Printing levels	256 levels per color (RGB)
Supported image	JPEG
format
Printable image	60 × 60 to 6400 × 6400 pixels
sizes
Max. supported file	IrDA (FIR, SIR/IrSimple bidirectional mode) and
	USB: Unrestricted
size
	IrDA (FIR IrSimpleShot): Up to 1 MB (c)

Image enhancement	Image Intelligence™
functions	SHARPEN Mode
Printing time	Image recording - photo output (fed out):
	Approx. 20 sec.
	Using infrared communication only: Approx. 100
Possible number of	prints (under FUJIFILM test conditions)
prints	Using PictBridge communication only: Approx.
	70 prints (under FUJIFILM test conditions)
Power supply	Two CR2 lithium batteries
	AC power adaper (optional: AC-5VX)
Power consumption	3.0 W (writing/feeding)
Auto Power Off	Using batteries as the power supply: 3 minutes
	Using the AC power adapter as the power
delay
	supply: 10 minutes
Operating	+5°C to +40°C (no condensation)
temperature	(+41°F to +104°F)
Dimensions	146 × 102 × 29 mm (5.7 × 4.0 × 1.1 in.)
Weight (without
batteries and photo	225 g
pack)

c SIR IrSimpleShot is not supported.

x Specifications are subject to change without notice.

FUJIFILM shall not be held liable for damages resulting from errors in this owner’s manual.

50 51