![](/images/new-backgrounds/1192695/19269515x1.webp)
Handling & Care
■Using USB interface
1.Use the USB cable suitable for the digital camera or camera phone.
2.Ensure that the USB cable is no more than 3 meters (9.8 ft.) long.
■Using the AC power adapter
Use the FUJIFILM AC Power Adapter
1.Use the AC power adapter indoors only.
2.Plug the power cord securely into the DC input terminal of the printer.
3.Turn off the printer before disconnecting the power cord from the printer’s DC input terminal. To disconnect, pull out the plug gently. Do not pull on the cord.
4.Do not use the AC power adapter with any device other than your printer.
5.During use, the AC power adapter may become warm to the touch. This is normal.
6.Do not disassemble the AC power adapter. Doing so could be dangerous.
7.Do not use the AC power adapter in a hot and humid place.
8.Do not subject the AC power adapter to strong shocks.
9.The AC power adapter may emit a humming. This is normal.
10.If used near a radio, the AC power adapter may cause static. If this happens, move the printer away from the radio.
■Photo pack and print care
1.Keep a photo pack in a cool and dry place. Do not leave a photo pack in a place where the temperature is extremely high (e.g. in a closed car) for long periods.
2.When you load a photo pack, use all the films as soon as possible.
3.If a photo pack has been kept in a place where the temperature is extremely high or low, leave it at normal room temperature for a while before starting to print.
4.Be sure to use the photo pack within the validity period.
5.Avoid airport checked luggage inspection and other strong
6.Avoid strong light, keep the prints in a cool and dry place.
14 | 15 |