Fujitsu B23Q8YA-G-02-F manual 27

Parameter	Status		Meaning
lp_10hdx_cap	Read only	Setting of link-partner
		10Mbps/HalfDuplex, when link up
		with AutoNegotiation.
		0	: Invalid
		1	: Valid
lp_100fdx_cap	Read only	Setting of link-partner
		100Mbps/FullDuplex, when link up
		with AutoNegotiation.
		0	: Invalid
		1	: Valid
lp_100hdx_cap	Read only	Setting of link-partner
		100Mbps/HalfDuplex, when link up
		with AutoNegotiation.
		0	: Invalid
		1	: Valid
lp_1000fdx_cap	Read only	Setting of link-partner
		1000Mbps/FullDuplex, when link up
		with AutoNegotiation.
		0	: Invalid
		1	: Valid
lp_1000hdx_cap	Read only	Setting of link-partner
		1000Mbps/HalfDuplex, when link up
		with AutoNegotiation.
		0	: Invalid
		1	: Valid
lp_pauseTX	Read only	Setting of link-partner transmit pause
		frame, when link up with
		AutoNegotiation.
		0	: Invalid
		1	: Valid
lp_pauseRX	Read only	Setting of link-partner receive pause
		frame, when link up with
		AutoNegotiation.
		0	: Invalid
		1	: Valid
lp_autoneg_cap	Read only	Setting of link-partner
		AutoNegotiation, when link up with
		AutoNegotiation.
		0	: Invalid
		1	: Valid
role_cap	Read only	The present Role setting, when
		1000Mbps.
		0	: Slave
		1	: Master
jumbo	Read only	0 : JumboFrame function is not used.
		1	: JumboFrame function is used.

Notes

-Because of the specification of ndd utility, if two or more processes execute ndd command for a fjgi interface at the same time, the value will be invalid.

21