Message |
| Cause |
| Workaround | |
fjgi_board_init_mem: | DMA resources cannot be allocated. |
| |||
Failed to dma_alloc !! |
|
|
|
| |
statistick block can't |
|
|
|
| |
alloced!! |
|
|
|
| |
hwmib block can't alloced | Statistic | information | resources |
| |
handle! | couldn't be allocated. |
|
| ||
hwmib block can't bind |
|
|
|
| |
handle! |
|
|
|
| |
fjgi_board_init_mem: | DMA resources cannot be allocated. |
| |||
Failed to dma alloc2!! |
|
|
|
| |
Illegal value for | The value of LinkSpeed_A of a | Please set a right value of | |||
LinkSpeed_A | setting file was wrong. |
| LinkSpeed_A. | ||
fjgi_hw_init:Step 22 |
|
|
|
| |
failed !! |
|
|
|
| |
fjgi_hw_init:Step 23 | The error occurred in initialization. | Hardware failure was occurred. Please | |||
failed !! | report to your authorized dealer. | ||||
|
|
| |||
fjgi_hw_init:Step 43 |
|
|
|
| |
failed !! |
|
|
|
| |
Illegal combination of | Auto speed couldn't be set in fixed | Please set value except Auto in | |||
values AutoNeg and Speed | mode. |
|
| LinkSpeed_A. | |
Except for the above | There is the possibility that is Driver | Report that to your authorized dealer. | |||
| internal bug or Hardware failer. |
| |||
*1: This appears only when 1000Mbps is used.
Table 4.4 Machine management report messagesMessage | Meaning | Workaround |
fjgi_device_check: | The error occurred in initialization of | There is the possibility of hard |
fjgi_hw_deinit failed ! | an adapter. | abnormalities. Report them to your |
fjgi_device_check: |
| authorized dealer. |
fjgi_hw_init failed ! |
|
|
pci_config_setup_failed | Acquisition of PCI configuration | There is the possibility of the shortage |
| space went wrong. | of resources or hard abnormalities. |
|
| Please check the empty space of a |
|
| memory. Report them to your |
|
| authorized dealer. |
4.5Using GigabitEthernet on a Cluster System
4.5.1Support for Cluster System
The contents of support at the time of using by the cluster system, the environmental setting method, etc. are explained.
GigabitEthernet has the following functions on the cluster system:
zOperation standby mode
28