Chapter 1 Notes after the Installation

This chapter describes the post-installation notes.

1.1PRIMEPOWER - Specific Notes

1.1.1Modifications of Solaris OS (Patches, PTF, Program Local Fix)

Only the modifications (patches, PTF, Program Local Fix, etc.) for PRIMEPOWER provided by FUJITSU LIMITED can be applied to existing PRIMEPOWER systems running Solaris OS software.

Do not use patches provided by Sun Microsystems, Inc. on the World Wide Web or those provided by other vendors. Also be careful that you do not apply modifications (patches, PTF, Program Local Fix, etc.) intended for other systems (GP7000D, etc.) provided by FUJITSU LIMITED.

For information on Solaris OS modifications, contact a FUJITSU systems engineer.

1.1.2Changing the date and time
PRIMEPOWER 1/200/250/400/450/600/650/850

Use the date command in single user mode if you need to change the date and time for testing purposes.

PRIMEPOWER 800/900/1000/1500/2000/2500

See "System Console Software User's Guide" for information on how to change the date and time.

1.1.3Serial port
1.1.3.1PRIMEPOWER800/1000/2000

zAll serial ports on the system board are to be used for the System Management Console.

zDo not access the following devices relating to serial ports. Also do not change the setting of applications using the following device files (such as a port monitor).

-/dev/term/a, b, ...

-/dev/cua/a, b, ...

-/dev/term/fa000, fa001, ...

-/dev/cua/fa000, fa001, ...

-/dev/se_hdlc

-/dev/se_hdlc0, /dev/se_hdlc1, ...

However, devices that are not used as the console path may be used, but only for the FJVTS and SunVTS. The usable default devices for FJVTS and SunVTS are /dev/term/fa003, fa004, ... and /dev/se_hdlc3, se_hdlc4, ...

1.1.3.2PRIMEPOWER900/1500/2500

zThe device name of the serial port will be as follows:

1