No | Limitations and known bugs | Remarks | |
| Recommended actions |
| |
27 | There are some differences in behavior of MIB between SNMP agents of SMA and |
| |
| SEA. |
| |
| z | sysObjectID (MIB to show system device type) |
|
|
| SEA shows the value as “enterprises.42.2.1.1”, however, SMA shows the value as |
|
|
| “netSnmpAgentOIDs.3”. |
|
| z | snmpEnableAuthenTraps (MIB to show permission of trap of authorization |
|
|
| failure) |
|
|
| SEA shows the value as “enabled(1)”, however, SMA shows the value as |
|
|
| “disabled(2)”. |
|
| z | ifSpeed (MIB for supported bandwidth speed of the network interface) |
|
|
| The results may be different between SEA and SMA. |
|
| z | ifType |
|
|
| The results may be different between SEA and SMA. |
|
| Use SEA instead of SMA. The following disables SMA and enables only SEA. |
| |
| 1) | Stop SMA and rename rc startup script of SMA. |
|
|
| # /etc/init.d/init.sma stop |
|
|
| # mv /etc/rc3.d/S82initsma /etc/rc3.d/_S82initsma |
|
| 2) | Rename /etc/rc3.d/S75seaport |
|
|
| # mv /etc/rc3.d/S75seaport /etc/rc3.d/_S75seaport |
|
| 3) | Set port number from 16161 to 161 for SEA in /etc/snmp/conf/snmpdx.reg |
|
| 4) | Create configuration files for SEA |
|
|
| # |
|
|
| # cp /etc/snmp/conf/snmpdx.acl /etc/snmp/conf/mibiisa.acl |
|
| 5) | Restart SEA |
|
|
| # /etc/init.d/init.snmpdx stop |
|
|
| # /etc/init.d/init.snmpdx start |
|
28 | The following error messages might be logged in SMF service log file. |
| |
|
| ERROR: Restarter: Ignoring REMOVE_INSTANCE command for unknown |
|
|
| service svc:/TEMP/{FMRI}. |
|
| Ignore these messages. They have no impact on the system. |
| |
29 | Packages that contain SMF service can not be removed using pkgrm(1M) |
| |
|
| ||
| the next system boot. |
| |
|
| SunOS Release 5.10 Version Generic |
|
|
| Copyright |
|
|
| Use is subject to license terms. |
|
|
| Hostname: |
|
|
| Starting SCF daemon. |
|
|
| svc.startd[7]: svc:/system/fjsvabc:default: Method "/lib/svc/method/fjsvabc" failed |
|
|
| with exit status 1. |
|
|
| svc.startd[7]: svc:/system/fjsvabc:default: Method "/lib/svc/method/fjsvabc" failed |
|
|
| with exit status 1. |
|
|
| svc.startd[7]: svc:/system/fjsvabc:default: Method "/lib/svc/method/fjsvabc" failed |
|
|
| with exit status 1. |
|
|
| [ system/fjsvabc:default failed (see 'svcs |
|
|
| ||
| Remove the package on the local file system after booting the remote image. |
|
36