No

Limitations and known bugs

Remarks

 

Recommended actions

 

5

For growfs(1M), the following patch is required to be installed.

Solaris 10

 

120254-02 or later SunOS 5.10: ufs Patch

3/05 and

 

Install the above patches.

1/06 only

6

When using any of the following PGX cards and monitors, the display monitor does not

Solaris 10

 

enter standby mode if you haven’t logged on from CDE (Common Desktop

3/05 only

 

Environment).

 

 

 

z PGX frame buffer (X3660A)

 

 

z PGX64 frame buffer (X3768A/A-A)

 

 

z Second monitor (X7128A/AA/AJ, X7128B)

 

 

To use PGX32 frame buffer (X3668A/A-A, X3668B/B-A/B-B), the following patches

 

 

are required to be installed.

 

 

119254-06 or later

SunOS 5.10: Install and Patch Utilities Patch

 

 

119309-03 or later

SunOS 5.10: PGX32 Graphics

 

 

The above removes the PGX frame buffer and monitor limitation. When using the PGX,

 

 

PGX64 frame buffer and a second monitor, ensure you turn off the power to the display

 

 

monitor when the monitor is not in use.

 

7

Some optional drivers are not yet supported with Solaris 10.

 

 

Contact your support engineer for details.

 

8

/etc/resolv.conf file might not be created when you select “DNS” name service during

Solaris 10

 

OS installation.

 

3/05 only

 

Install the following patch.

 

 

z 119252-02 or later SunOS 5.10: System Administration Applications Patch

 

9

svccfg(1M) might be terminated when editprop subcommand is used.

 

 

# svccfg

 

 

 

svc:> select /network/inetd

 

 

svc:/network/inetd> editprop

 

 

:q

 

 

 

svccfg: unrecognized character "

 

 

Use setprop subcommand of svccfg(1M) instead of editprop to modify properties of

 

 

service.

 

 

10

For Kernel debugger (kmdb(1), mdb(1) -K) on SPARC64 GP, the following patches are

Solaris 10

 

required to be installed.

3/05 only

 

118822-23 or later

SunOS 5.10: kernel Patch

 

 

Install the above patch.

 

11

Solaris Live Upgrade using lu(1M) and lucreate(1M) might fail with the following error

 

 

when creating a mirror disk.

 

 

# lucreate -m /:/dev/md/dsk/d10:ufs,mirror –m \

 

 

/:/dev/dsk/c1t2d0s0,d11:attach -m/:/dev/dsk/c1t3d0s0,d12:attach -n newBE

 

 

Discovering physical storage devices

 

 

Discovering logical storage devices

 

 

Cross referencing storage devices with boot environment configurations

 

 

Determining types of file systems supported

 

 

Validating file system requests

 

 

ERROR: file system option <mirror> is not valid on this system

 

 

ERROR: cannot use file system configuration </:/dev/md/dsk/d10:ufs,mirror>

 

 

ERROR: cannot create new boot environment using file systems as configured

 

 

ERROR: please review all file system configuration options

 

 

ERROR: cannot create new boot environment using options provided

 

32