ok

4.Search the device path to the secondary LAN port with a show-nets command from ok prompt of a client system.

ok show-nets<Return>

Example

ok show-nets

a)/pci@83,2000/FJSV,pwga@1

b)/pci@1f,4000/FJSV,pgsb@4

q)NO SELECTION

Enter Selection, q to quit:

5.From ok prompt of a client system, please start a client system using the secondary LAN port. ok boot /pci@83,2000/FJSV,pwga@1 <Return>

6.Install the Solaris

4.3.2.6Configuring VLAN interface

4.3.2.6.1IEEE 802.1Q TagVLAN

The outline about a VLAN interface and directions required in order to setup VLAN interface are explained.

About IEEE802.1Q TagVLAN

By using VLAN, traffic management of two or more networks by a single physical interface becomes possible. In order to create a VLAN environment, which resembles Figure 4.1 Example of VLAN environment, a VLAN setup (VLAN ID and Tagged/Untagged) of a switch is required.

24