Appendix A Racks
A.2 Rack Mounting Requirements
Rack mounting requirements
The following table lists the requirements for mounting in one rack.
Model |
| Number of |
| Mounting area |
| mountable units |
| ||
|
|
|
| |
|
|
|
| The bottom of the mounted device must not be |
PRIMEQUEST 2000 series | 3 |
| below 1U. (*1) | |
| The top of the mounted device must not be above | |||
|
|
|
| |
|
|
|
| 1,066 mm from floor. (*2). |
PCI_Box |
| No mounting requirements | ||
(*1) For the models 2742/2737/2724/2642/2624/2616 and PCR M1 742S/724S/642S/624S/616S/742A/724A, the bottom of the mounted device must not be below 2U.
(*2) For the models 2742/2737/2724/2642/2624/2616 and PCR M1 742S/724S/642S/624S/616S/742A/724A, the top of the mounted device is 22U (1,020 mm).
For details, contact the distributor where you purchased your product, or your sales representative.
FIGURE A.1 Example of rack mounting
NumberDescription
(1)Example 1 of rack mounting for model 2642
(2)Example 2 of rack mounting for model 2642
(3)1,022 mm
(4)1,060 mm
|
|
|
36 | ||