CHAPTER 2 Connected Information 2.3 Power cable connection

200 V Dual Power Feed Configuration with Power Distribution Box Connection

It is necessary to arrange six PSUs, six power cables (200 V IEC60320 C20) and four power distribution boxes (200 V IEC60320 C19×3type) for 200 V dual power feed configuration.

When the power distribution box is used, it is necessary to secure the breaker characteristic of distribution panel. See “2.6 Cutoff Characteristics of Distribution Panel (At the time of connecting power distribution box).”

FIGURE 2.20 200 V Dual Power Feed Configuration with Power Distribution Box Connection

Number

Description

(1)

Power distribution box (200V C 19 3 type)

2.3.3 Power Cable Connections (PCI_Box)

This section shows the figure of input power of PCI_Box.

Remarks

While configuring redundant power feed and dual power feed in this device, configure the same power feed to PCI_Box.

100 V Configuration (single power feed, no redundant power feed)

It is necessary to arrange PSU and power cable (100 V NEMA 5-15P) for 100 V configuration (Single power feed, no redundant power feed).

FIGURE 2.21 100 V Configuration (Single power feed, no Redundant power feed)

NumberDescription

(1)Customer distribution panel AC 100V AC#0 system

 

 

 

27

C122-H007-01EN