Fujitsu F9600 F9600c manual

Call Warning Call warning tone is two brief bursts of tone Tone indicating that the most expensive route has been

chosen for your outgoing call.

Do Not Disturb Do not disturb tone is a continuous beep to Tone indicate that the called party has registered Do Not

Disturb at their extension.

Override Tone Override tone is two seconds of the override tone followed by a continuous lower volume tone. The override tone is heard by all parties prior to an override. The lower volume tone is heard by all parties during the override.

Meet-MeMeet-Me conference tone is a three second tone Conference heard during conference calls to indicate that

Tone additional parties are entering the conference.

Message Message waiting tone is a repetitive .5 second dial Waiting Tone tone followed by a .5 second pause. When you

have messages waiting, you will hear this tone instead of the internal dial tone when you pick up the handset.

One Burst One burst tone occurs when a caller camps-on to Tone a busy extension. It is a .5 second tone that lets

the busy extension know that there is a call waiting.

DISTINCTIVE The F9600/F9600c system produces four different

RINGING ringing patterns to indicate the source of incoming calls. The pattern of the ring distinguishes the type of call:

•Extension to extension call.

•Incoming call.

•Camp-On callback and forwarded call.

•Data call.

•Intercom call.

The ringing patterns are shown in Table 2 at the end of this guide.

5