Setting a Reset Signal | Fujitsu MB2198-130 specification

Chapter 5 Usage

5.3 Setting a Reset Signal

The reset signal is supplied to evaluation MCU from the user system or the emulater. Please use a setup at the time of product shipment of a jumper plug.

■Setting the Reset signal

A setup at the time of product shipment of a jumper plug is shown in Fig. 5.3-1. By this setup, the INITX signal (INIT) of evaluation MCU is supplied from the INITX signal of a user system via an emulator, and the TRSTX signal (TRST) of evaluation MCU is supplied from the reset signal of an emulator.

INIT

USR

USR

TRST

EML

EML

Figure 5.3-1 Setting the Reset Signal Setting Jumper Plugs (Factory Setting)

30

Image 37

Fujitsu MB2198-130 operation manual Setting a Reset Signal, Setting the Reset signal

Contents

DSU-FR emulator Page Warranty and Liability Disclaimers Using the product safelyProduct Operating Environment Related Manuals Organization of this manual Vention mechanism of the socket, resulting in a fault Connect the cable core, resulting in a faultSuch pointed parts Tric field for an extended period of timePage Contents Product Overview and Handling Precautions Overview Overview Checking the Items Packaged Checking the Items Packaged Options Options1 Options Name Part number Storing Precautions Handling Precautions1 Operating and Storage Environments Temperature Humidity Memo Product Description System Configuration System Configuration Appearance and Part Names Appearance and Part Names ➂ Memory size select switch Product Description ➀ Emulator connector➄ Reset signal setting jumper plugs ➅ Memory board connector 1 lists the general specifications of the adapter General SpecificationsGeneral Specifications 1 General Specifications Memo This chapter describes the functions of the adapter Functions Function Specifications Function Specifications Connector and Socket Specifications Connector and IC Socket Specifications1 Connector and IC Socket Specifications Memo Connections Connecting the Adapter Board and the Emulator Connecting the Adapter Board to the Emulator Connecting the Adapter Board to the Header Board Connecting the Adapter Board with the Header Board Installing the Evaluation MCU Installing the Evaluation MCUMounting Position Securing the Evaluation MCU Uninstalling the evaluation MCU Memory board Clips Memory board connector Installing the Memory BoardMemory board Memory board connector Unite a position Securing the Memory Board Uninstalling the Memory BoardMemory board Installing a Bypass Capacitor Installing a Bypass Capacitor for DvccIndex − Capacitor Long pin is plus polarity Capacitor mounting socket Usage Setting up the Evaluation MCU Power Supply Setting up the Evaluation MCU Power Supply VSEL1 1 Jumper Plug Settings Installing the Oscillator Setting the Clock Supply Circuit X0/X1 Setting the Clock Selector Jumper Plugs Setting the Reset signal Setting a Reset Signal Setting the Memory Size Select Switch Setting a External Memory Emulation SW4 Setting the Memory Connective Switches Power-on Procedure Power-on/Shutdown Procedures 2 Dialog Display Shutdown Procedure General Cautions on the Adapter Page User Interface Specifications Appendix User Interface Specifications Connector is mounted Surface Back Adapter board Header or a user system Flat cable connector Table A-1 Pinouts of Flat Cable Connector a Table A-2 Pinouts of Flat Cable Connector B Fujitsu Semiconductor Support Sysyem SS01-71047-1E