Fujitsu MB2198-130 Product Description ➀ Emulator connector, ➁ IC socket for evaluation MCU

Chapter 2 Product Description

➀Emulator connector

This connector accepts the emulator (Mounted on the rear side).

➁IC socket for evaluation MCU

401-pin PGA IC socket for mounting an evaluation MCU

➂Memory size select switch

This switch sets the capacity of the memory board to use external-memory emulation.

➃DVCC bypass capacitor sockets

These sockets accept bypass capacitors to be inserted between DVCC and GND pins.

➄Reset signal setting jumper plugs

These jumper plugs are used to set the reset signal supply origin.

➅Memory board connector

This connector accepts a memory board (for external-memory emulation).

➆Flat cable connectors

Use the bundled flat cables to connect the header to the adapter board (Mounted on the rear side).

➇Memory connective switches

These switches disconnect buffers so that signal conductors can be used without being loaded when external-memory emulation is not used or when address lines disabled by memory capacity switch- ing are used as user resources.

➈Jumper plugs for setting the evaluation MCU power supply

These jumper plugs are used to make settings for the evaluation MCU.

➉Clock input IC sockets and clock input select jumper plugs

The IC sockets accept an oscillator and a capacitor for the main clock and subclock; the jumper plugs are used to set the clock supply source.

10