CAUTION
Indicates a potentially hazardous situation which, if not avo ided appropriately, may
result in minor or moderate injury and/or damage to the product or the equipment
to which the product is connected, to software resources such as data, or to other
properties.
Cuts, Damage B efore moving the product, be sure to turn off all the power supplies and unplug the
cables. Watch your steps when carrying the product. Do not use the product at an
unstable location such as a place exposed to strong vibrat ion or a sloping surface.
Doing so may let the product fall, resulting in an injury or fault.
Cuts The product has some sharp-pointed or edged parts ine vitably exposed, such as
jumper plugs. Use meticulous care in handling the product not to get injured with
such pointed parts.
Damage Neither put anything on or apply shock to the product. Once the product has been
powered, do not carry it. Doing either may cause a fault due to a load or shock.
Damage
Since the product contains many electronic components, keep it away from direct
sunlight, high temperature, and high humidity to prevent condens ation. Do not use
or store the product where it is exposed to much dust or a strong magne tic or elec-
tric field for an extendedperiod of time.
An adverse operating or storage environment can cause a fault.
Damage Use the product within the ranges of its general specifications.
Operating it outside the range of any general specifica tion may cause a fault.
Damage To prevent electrostatic breakdown, do not let your finger or a n object touch any
metal part of the connector. Before handling the pro duct, touch a metal object (such
as a door knob) to discharge static electricity from your body.
Damage
When turning the power on or off, follow the relevant procedu re described in this
manual. Before turning the power on, in particular, b e sure to finish making all the
required connections. To set up and use the product, f ollow the instructions given
in this manual.
Using the product incorrectly or inappropriately may cause a fault.
Damage Before plugging or unplugging any cable for this produc t, be sure to turn the power
supply off. When unplugging the cable, remove it while holding the connector with-
out pulling the cable itself. Pulling the cable itself or bending it may expose or dis-
connect the cable core, resulting in a fault.
Damage
Although the MCU socket is structured not to accept an evaluation MCU i n a wrong
orientation or position, pay due attention to the m ounting orientation when mounting
the evaluation MCU. Forcing the evaluation MCU to be inserted in a wrong orie nta-
tion can damage the pins of the evaluation MCU and th e accidental insertion pre-
vention mechanism of the socket, resulting in a fault.
Damage When stored, the product should be kept in its packaging box as it has no housing.
Re-transporting the product may damage it to cause a fau lt. Keep the packaging
materials used for shipment of the product and use them when re-transporting it.
iii