Manuals / Fujitsu / Computer Equipment / Computer Drive

Fujitsu MHY2160BS, MHY2200BS, MHY2120BS manual Features Field values subcommands and functions 1/3

Models: MHY2160BS MHY2040BS MHY2100BS MHY2080BS MHY2120BS MHY2060BS MHY2200BS

1 322

Download 322 pages 50.89 Kb

Page 133

5.3 Host Commands

Table 5.9 Features Field values (subcommands) and functions (1/3)

Features Field		Function

X 'D0'	SMART READ DATA:
	A device that received this subcommand saves all the updated attribute
	values. The device then transfers 512-byte attribute value information to the
	host after transferring PIOSU.
	* For information about the format of the attribute value information, see
	Table 5.10.

X 'D1'	SMART READ ATTRIBUTE THRESHOLDS:
	This subcommand is used to transfer 512-byte guarantee failure threshold
	value data to the host.
	* For information about the format of the guarantee failure threshold value
	data, see Table 5.11.

X 'D2'	SMART ENABLE/DISABLE ATTRIBUTE AUTOSAVE:
	Enables (by setting the Sector Count field to a value other than 00h) or disables
	(by setting the Sector Count field to 00h) a function that automatically saves
	device attribute values ("automatic attribute save function"). This setting is
	held regardless of whether the device is turned on or off. If the automatic
	attribute save function is enabled and more than 15 minutes has elapsed since
	the last time that attributes were saved, then the attributes are saved.
	However, if the automatic attribute save function is disabled, the attributes
	are not saved. Upon receiving this subcommand, a device enables or
	disables the automatic attribute save function, and transfers the RegDH, then
	reports the status.
	In this drive, this function is enabled at the shipment from the factory.

X 'D3'	SMART SAVE ATTRIBUTE VALUES:
	When the device receives this subcommand, if saves device attribute value
	data, and transfers the RegDH, then reports the status.

X 'D4'	SMART EXECUTIVE OFF-LINE IMMEDIATE:
	A device which receives this command starts collecting the off-line data
	specified in the Sector Number field, or stops.
	In the off-line mode, after transferring the RegDH, off-line data are
	collected. In the captive mode, it collects off-line data then transfers the
	RegDH when collection of data is completed.
		SN Off-line data collection mode
	00h: Off-line diagnosis (off-line mode)
	01h: Simple self-test (off-line mode)
	02h: Comprehensive self-test (off-line mode)
		03h: Conveyance self-test (off-line mode)
	04h: Selective self-test (off-line mode)
	7Fh: Self-test stop
	81h: Simple self-test (captive mode)
	82h: Comprehensive self-test (captive mode)
		83h: Conveyance self-test (captive mode)
		84h: Selective self-test (captive mode)

C141-E269

5-55

Image 133

Fujitsu MHY2160BS, MHY2200BS, MHY2120BS, MHY2040BS, MHY2080BS, MHY2060BS Features Field values subcommands and functions 1/3

Contents

Disk Drives PRODUCT/MAINTENANCE Manual Handling of This Manual For Safe Operation Revision History This page is intentionally left blank Overview of Manual Operating Environment Conventions for Alert MessagesAcronyms and Abbreviations Liability Exception Conventions Hot Plug Static, Damage Important Alert Messages Data corruption Device damageDamage or Device damage Manual Organization Disk Drives PRODUCT/MAINTENANCE Manual This page is intentionally left blank Contents Theory of Device Operation Installation Conditions Interface Contents 100 Operations Power Save Maintenance and Diagnosis Glossary GL-1 Acronyms and Abbreviations AB-1 Index IN-1 Illustrations 176 Tables Surface temperature measurement points and standard values 105 This page is intentionally left blank Device Overview Features Interface Error correction and retry by ECC Device Specifications MHY2160BS MHY2200BSMHY2120BS MHY2100BS Power Requirements Permissible level − 0.2 Current and power dissipation Environmental Specifications Acoustic Noise MTBF= Reliability Error Rate Advanced Power Management APM Advanced Power Management Interface Power Management IPM Interface power management This page is intentionally left blank Device Configuration Disk Device ConfigurationHead Spindle motor Sata interface System ConfigurationDrive connection This page is intentionally left blank Installation Conditions Dimensions Dimensions Orientation MountingFrame PCA Limitation of mounting Location of breather Ambient temperature Handling cautions Service area Hios ESD Connections with Host System Device connector Connector specifications for host system Signal segment and power supply segment Sata interface cable connection This page is intentionally left blank Theory of Device Operation Subassemblies OutlineDisk Spindle Air filter Circuit ConfigurationServo circuit Spindle motor driver circuit Power supply configuration PCA Power-on Sequence Power-onStart Self-calibration Self-calibration contents Execution timing of self-calibration Command processing during self-calibration Read/write preamplifier PreAMP Read/write CircuitWrite circuit Write precompensation AGC circuit Read circuitProgrammable filter circuit FIR circuit Digital PLL circuitD converter circuit Viterbi detection circuit Servo control circuit Servo Control Microprocessor unit MPU Power amplifierServo burst capture circuit A converter DAC Data-surface servo format Physical sector servo configuration on disk surface Servo frame format Operation to move the head to the reference cylinder Actuator motor controlSeek operation Track following operation Acceleration mode Start modeStable rotation mode Spindle motor control This page is intentionally left blank Interface Physical Interface Interface signals Comwake Comreset / Cominit5VDC/GND Out of band signaling Signal interface regulation Primitives descriptions Electrical specifications Connector pinouts Connector pinouts Staggered Spin-up 5 P11 functionDriving Activity LED Example of the circuit for driving Activity LED Requirements for P11 as an output pin Hot Plug Logical Interface Conceptual diagram of communication layers Physical layer Communication layersLink layer Transport layer Shadow Block Register Outline of the Shadow Block Register FIS types Outline of the frame information structure FIS Register Host to Device FIS layout Register Host to Device DMA Active Device to Host 3.3 Register Device to Host TAG DMA Setup Device to Host or Host to Device Bidirectional Bist combinations Bist Active Bidirectional Data Host to Device or Device to Host Bidirectional PIO Setup Device to Host Block at the conclusion of all subsequent Data to Device 11 Set Device Bits FIS Set Device Bits Device to Host Shadow block registers Error FieldUNC Sector Count Field exp Features Field expSector Number Field exp Cylinder Low Field exp Device/Head Field Cylinder High Field expHS3 HS2 HS1 HS0 HS3 BSY Status fieldDSC DRQ ERR Bit 2 Software Reset Srst Command FieldDevice Control Field EStatus Field Command code and parameters Host CommandsCommand code and parameters 1/3 Command code and parameters 2/3 Command code and parameters 3/3 Command descriptions Recalibrate X 10 to X 1F Error reporting conditions Read Sectors X 20 or X LBA LSB LBA Write Sectors X 30 or X 00 *1 Error information Write Verify X 3C Host Commands Read Verify Sectors X 40 or X Host Commands Seek X 70 to X 7F Diagnostic code Execute Device Diagnostic X Initialize Device Parameters X Download Microcode X Operation of Download Microcode Microcode Standby Immediate X 94 or X E0 Host Commands Unload Feature Unload Immediate Command Standby X 96 or X E2 Idle X 97 or X E3 Host Commands Check Power Mode X 98 or X E5 Sleep X 99 or X E6 Comreset Smart X B0 Features Field values subcommands and functions 1/3 Smart Enable Operations Features Field values subcommands and functions 2/3Smart Read LOG Smart Write LOG Smart Disable Operations Features Field values subcommands and functions 3/3Smart ENABLE/DISABLE Auto OFF-LINE Smart Return Status Key C2h Key 4Fh 10 Format of device attribute value data 11 Format of guarantee failure threshold value data1FF Attribute ID Data format version number Current attribute value Status FlagAttribute value for the worst case so far Raw attribute value Self-test execution status 12 Off-line data collection status13 Self-test execution status 14 Off-line data collection capability Off-line data collection capabilityFailure prediction capability flag 15 Failure prediction capability flag 16 Drive error logging capability Error logging capabilityGuarantee failure threshold Checksum 18 Data format of Smart Summary Error Log 1/2 Smart error logging Command data structure 18 Data format of Smart Summary Error Log 2/2Error data structure Total number of drive errors Status 19 Data format of Smart Comprehensive Error LogSmart Self-Test 1FC 20 Smart self-test log data formatSelf-test number Self-test index Test Span 21 Selective self-test log data structureCurrent LBA under test 22 Selective self-test feature flags Feature FlagsSmart Command Transport SCT Current Span under test SCT Command SET 23 SCT command and the functionSCT Status Request SCT Read Data SCT Status Request SN = E0h, FR = D5h SET MAX EXT, DCO 24 Format of SCT Status Response 1/2 24 Format of SCT Status Response 2/2 25 SCT Status code SCT Command SET SN = E0h, FR = D6 Write Same 27 Write Same 1/2 Error Recovery Control 28 Error Recovery Control27 Write Same 2/2 29 Feature Control Command SCT Data Table 30 SCT Data Table 31 had Temperature SCT Read Data SN = E1h, FR = D5h SCT Write Data SN = E1h, FR = D6h Device Configuration Restore Device Configuration X B1Device Configuration Freeze Device Configuration Identify Device Configuration Freeze Lock Features Field = C1h Device Configuration Restore Features Field = C0h Device Configuration SET Features Field = C3h Device Configuration Identify Features Field = C2h 32 Device Configuration Identify data structure 1/2 32 Device Configuration Identify data structure 2/2 Read Multiple X C4 12 Execution example of Read Multiple command Start sector No Write Multiple X C5 Start sector No SET Multiple Mode X C6 Host Commands Read DMA X C8 or X C9 LSB / LBA MSB / LBA Write DMA X CA or X CB Host Commands Read Buffer X E4 Flush Cache X E7 Write Buffer X E8 Identify Device X EC Identify Device DMA X EE 33 Information to be read by Identify Device command 1/3 33 Information to be read by Identify Device command 2/3 33 Information to be read by Identify Device command 3/3 Fffffff MHY2200BS MHY2160BS MHY2120BSMHY2100BS MHY2080BS MHY2060BS MHY2040BS Command without interrupt supports 1, 2, 4, 8 and 16 sectors Interface C141-E269 111 Interface C141-E269 113 = Enables the read cache function. From the SET Features Undefined = Read and Write DMA EXT GPL optional commands are = SCT Error Recovery Control supported Download 34 Features field values and settable modes 1/2 SET Features X EF 34 Features field values and settable modes 2/2 Error reporting conditions Data Transfer Mode Advanced Power Management APM Serial ATA Functions Automatic Acoustic Management AAM Write-Read-Verify feature optional 35 Contents of Security SET Password data Error reporting conditions When the user password is selected When the master password is selectedSecurity Unlock X F2 Host Commands Security Erase Prepare X F3 Security Erase Unit X F4 Security Freeze Lock X F5 Error reporting conditions 37 Contents of security password Error reporting conditions Lbalsb Read Native MAX Address X F8 SET MAX Address SET MAX X F9 SET MAX SET Password Features Field = 01h Password information SET MAX Lock Features Field = 02h SET MAX Unlock Features Field = 03h SET MAX Freeze Lock Features Field = 04h CL EXP Read Sector S EXT X DescriptionSN EXP Read DMA EXT X Description Read Native MAX Address EXT X Read Multiple EXT X Read LOG EXT X 2F CL EXP SN EXP 39 Tag field information 38 Data format of Read Log Ext log page 10h 41 Counter Identifier information 40 Data format of Read Log Ext log page 11h SC EXP SCT Status Request SN = E0h SCT Read Data SN = E1h, FR = D5 Write Sector S EXT X Description Write DMA EXT X Description SET MAX Address EXT X SET MAX LBA Write Multiple EXT X Write DMA FUA EXT X 3D Write LOG EXT X 3F Error information 160 C141-E269 SCT Command SET SN = E0h SCT Write Data SN = E1h Read Verify Sector S EXT X Write Uncorrectable EXT X 42 Operation mode Read LOG DMA EXT X Description Write LOG DMA EX X Description Read FP DMA Queued X Description Write FP DMA Queued X Write Multiple FUA EXT X CE Flush Cache EXT X EA 43 Command code and parameters 1/2 Error postingCommand Name Sfrw Sfrr 43 Command code and parameters 2/2 Execute Device Diagnostic Initialize Device Parameters Command ProtocolData Non-data command protocol Host PIO data-in command protocol 14 PIO data-in command protocol PIO data-out command protocol 15 PIO data-out command protocol Read DMA EXT Identfy Device DMA Read LOG DMA EXT DMA data-in command protocol Write DMA EXT FUA EXT Write LOG DMA EXT DMA data-out command protocol Read FP DMA Queued Write FP DMA Queued Native Command Queuing protocol 18 Read FP DMA Queued command protocol 19 Write FP DMA Queued command protocol 20 Power-on sequence Power-on and Comreset 21 Comreset sequence This page is intentionally left blank Operations Response to power-on Reset and Diagnosis Reset and Diagnosis Response to Comreset Response to Comreset Comreset preservation requirements Software settings preservation SET Address MAX EXT Response to a software reset Response to a software reset Power save mode Power SaveActive mode Active idle mode Sleep mode Standby mode Power commands Power save mode of the interface Power Save Controlled by Interface Power Management IPMPartial mode Slumber mode Data buffer structure Read-ahead CacheExample of 8 MB buffer Read Sector S EXT Caching operation Commands that are targets of cachingData that is a target of caching Invalidating caching-target data Miss-hit Using the read segment buffer Sequential hit Full hit Partial hit Write Cache Command that are targets of cachingCache operation Invalidation of cached data Comreset and software reset response Status report in the event of an errorCashing function when power supply is turned on Enabling and disabling This page is intentionally left blank Maintenance and Diagnosis Rules for maintenance Maintenance Maintenance requirements Data corruption Maintenance levels Disk drive revision number label Disk drive revision number Display of disk drive revision number Tools and test equipment Self-diagnosticsTest Test flowchart Disposition for Error Field contents Status Field contents Operation Confirmation Diagnostic testOperation test Troubleshooting procedure Troubleshooting ProcedureTroubleshooting disk drive replaced in field VDC System level and field troubleshooting Troubleshooting at factory Spare Disk Drive Disk Drive Removal Procedure This page is intentionally left blank Connector Connector Plug Host system side CommandActuator AT bus Rotational delay Power save modeMaster Device PIO Programmed input-output Slave Device Serial-ATAStatus This page is intentionally left blank Abrt BiosAIC Amnf This page is intentionally left blank Index Index Example of model name and product Mode Read Native MAX Address Read/write circuit block diagram Smart summary error log, data Japan Comment Form This page is intentionally left blank C141-E269-01EN Page