Interface

*3) Serial ATA Functions

The host can enable and disable the following Serial ATA functions by issuing this command after setting X '10/90' in the Features field and an applicable value in the Sector Count field:

Serial ATA function

Sector Count field

 

 

Non-zero buffer offset in DMA Setup FIS

01h (*1)

DMA Setup FIS Auto-Activate optimization

02h (*2)

Device-initiated interface power state Transitions

03h (*3)

Guaranteed In-Order Data Delivery

04h (*1)

Asynchronous Notification

05h (*1)

Software Settings Preservation

06h (*4)

 

 

*1 The device normally responds to the command but performs no operation.

*2 This feature is disabled when power is on. While this function is enabled, the device does not return the DMA Activate FIS for the first data sector after the WRITE FP DMA QUEUED command is issued.

*3 This feature is disabled when power is on. While this function is enabled, the device perform interface power save.

*4: This feature is enabled when power is on. While this function is enabled, the device preserves the software settings across COMRESET.

5-124

C141-E269

Page 202
Image 202
Fujitsu MHY2100BS, MHY2160BS, MHY2200BS, MHY2120BS, MHY2040BS, MHY2080BS, MHY2060BS manual Serial ATA Functions