Fujitsu MHY2080BS, MHY2160BS, MHY2200BS, MHY2120BS Device Configuration Identify data structure 1/2

5.3 Host Commands

Table 5.32 DEVICE CONFIGURATION IDENTIFY data structure (1/2)

Word	Value			Content
0	X '0002'	Data structure revision
1	X '0007'	Multiword DMA modes supported
		Reflected in IDENTIFY information "WORD63".
		Bits 15-3:	Reserved
		Bit 2:	1	= Multiword DMA mode 2 and below are supported
		Bit 1:	1	= Multiword DMA mode 1 and below are supported
		Bit 0:	1	= Multiword DMA mode 0 is supported
2	X '003F'	Ultra DMA modes supported
		Reflected in IDENTIFY information "WORD88".
		Bits 15-7:	Reserved
		Bit 6:	1	= Ultra DMA mode 6 and below are supported
		Bit 5:	1	= Ultra DMA mode 5 and below are supported
		Bit 4:	1	= Ultra DMA mode 4 and below are supported
		Bit 3:	1	= Ultra DMA mode 3 and below are supported
		Bit 2:	1	= Ultra DMA mode 2 and below are supported
		Bit 1:	1	= Ultra DMA mode 1 and below are supported
		Bit 0:	1	= Ultra DMA mode 0 is supported
3 to 6	-	Maximum LBA address Reflected in IDENTIFY information
		"WORD60-61". (WORD100-103) *
7	X '79CF'	Command set/feature set supported
	*	Reflected in IDENTIFY information "WORD82-87".
		Bit 15:	Reserved
		Bit 14:	1 = Write Read Verify feature set supported
		Bit 13:	1 = SMART Conveyance self-test supported
		Bit 12:	1	= SMART Selective self-test supported
		Bit 11:	1	= FUA (Forced Unit Access) supported
		Bit 10:	Reserved
		Bit 9:	1	= Streaming feature set supported
		Bit 8:	1	= 48-bit Addressing feature set supported
		Bit 7:	1	= Host Protected Area feature set supported
		Bit 6:	1	= Automatic acoustic management supported
		Bit 5:	1 = READ/WRITE DMA QUEUED commands
				supported
		Bit 4:	1	= Power-up in Standby feature set supported
		Bit 3:	1	= Security feature set supported
		Bit 2:	1	= SMART error log supported
		Bit 1:	1	= SMART self-test supported
		Bit 0:	1	= SMART feature set supported

C141-E269 5-87