Fujitsu MHY2080BS, MHY2160BS, MHY2200BS, MHY2120BS, MHY2040BS, MHY2060BS Write Uncorrectable EXT X

Models: MHY2160BS MHY2040BS MHY2100BS MHY2080BS MHY2120BS MHY2060BS MHY2200BS

1 322
Download 322 pages 50.89 Kb
Page 242
Image 242

Interface

(49) WRITE UNCORRECTABLE EXT (X '39')

Description

In this command, it is a purpose to make the uncorrectable error for specified LBA intentionally. It reports on the uncorrectable error in the LBA against corresponding LBA after this command ends the lead operation etc.

However, if a usual light operates afterwards even when the uncorrectable error is made by this command, it is recoverable. The command is specified by Logical Form (LBA), and the data transfer is unnecessary.

Moreover, SC was demanded and when "0000h" was specified, the processing of 65536 sectors was demanded.

Error re after the recovering transaction is done, disk write error that occurs while executing this command is reported.

The write operation ends in the sector (Even if it is during the block) where the error occurs. In this case, the number of sectors of remainder since the sector where the logical block address and the error where the error occurs occur is set in the shadow block register.

Error reporting conditions

(1)The command was issued in CHS mode. (ST = 51h, ER = 04h)

(2)When you specify excess the address of a possible write. (ST = 51h, ER = 10h)

(3)When you specify excess the address of a possible light during the write. (ST = 51h, ER = 10h)

(4)When you detect the write fault. (ST = 71h, ER = 10h)

(5)When you issue the command in the CHS mode. (ST = 51h, ER =04h)

(6)When the SATA communication error occurs. (ST = 51h, ER = 14h)

(7)When you detect the errors other than the above-mentioned. (ST = 51h, ER = 04h)

5-164

C141-E269

Page 242
Image 242
Fujitsu MHY2080BS, MHY2160BS, MHY2200BS, MHY2120BS, MHY2040BS, MHY2060BS, MHY2100BS manual Write Uncorrectable EXT X